Nothing.

Configures and initializes SPI Remappable module with default settings. SPI_Remappable_Init_Advanced or SPI_Remappable_Init_Init needs to be called before using other functions from SPI Remappable Library.

Default settings are:

• master mode
• clock Fosc/4
• clock idle state low
• data transimtted on low to high edge
• input data sampled at the middle of interval

  Note : Before using this library, make sure that Peripheral Pin Select Library is checked in the Library Manager, and that appropriate pins were mapped.

You'll need PIC MCU with hardware integrated SPI and remappable feature.

' Initialize the SPI Remappable module with default settings
SPI_Remappable_Init()

Nothing.

Configures and initializes SPI Remappable module. SPI_Remappable_Init_Advanced or SPI_Remappable_Init needs to be called before using other functions of SPI Library.

  Note : Before using this library, make sure that Peripheral Pin Select Library is checked in the Library Manager, and that appropriate pins were mapped.

Parameters mode, data_sample, clock_idle and transmit_edge configure the SPI module, and can have the following values:

Description	Predefined library const
SPI work mode:
Master clock = Fosc/4	_SPI_REMAPPABLE_MASTER_OSC_DIV4
Master clock = Fosc/16	_SPI_REMAPPABLE_MASTER_OSC_DIV16
Master clock = Fosc/64	_SPI_REMAPPABLE_MASTER_OSC_DIV64
Master clock source TMR2	_SPI_REMAPPABLE_MASTER_TMR2
Slave select enabled	_SPI_REMAPPABLE_SLAVE_SS_ENABLE
Slave select disabled	_SPI_REMAPPABLE_SLAVE_SS_DIS
Data sampling interval:
Input data sampled in middle of interval	_SPI_REMAPPABLE_DATA_SAMPLE_MIDDLE
Input data sampled at the end of interval	_SPI_REMAPPABLE_DATA_SAMPLE_END
SPI clock idle state:
Clock idle HIGH	_SPI_REMAPPABLE_CLK_IDLE_HIGH
Clock idle LOW	_SPI_REMAPPABLE_CLK_IDLE_LOW
Transmit edge:
Data transmit on low to high edge	_SPI_REMAPPABLE_LOW_2_HIGH
Data transmit on high to low edge	_SPI_REMAPPABLE_HIGH_2_LOW

You need PIC MCU with hardware integrated SPI and remappable feature.

' Set SPI to master mode, clock = Fosc/4, data sampled at the middle of interval, clock idle state low and data transmitted at low to high edge:
SPI_Remappable_Init_Advanced(_SPI_REMAPPABLE_MASTER_OSC_DIV4, _SPI_REMAPPABLE_DATA_SAMPLE_MIDDLE, _SPI_REMAPPABLE_CLK_IDLE_LOW, _SPI_REMAPPABLE_LOW_2_HIGH)

Returns the received data.

Reads one byte from the SPI bus.

Parameters :

• buffer: dummy data for clock generation (see device Datasheet for SPI modules implementation details)

You need PIC MCU with hardware integrated SPI and remappable feature.

SPI must be initialized and communication established before using this function. See SPI_Remappable_Init_Advanced or SPI_Remappable_Init.

dim buffer, take as byte

main :
  take = SPI_Remappable_Read(buffer)
end.

Nothing.

Writes byte data to SSPBUF, and immediately starts the transmission.

You need PIC MCU with hardware integrated SPI and remappable feature.

SPI must be initialized and communication established before using this function. See SPI_Remappable_Init_Advanced or SPI_Remappable_Init.

SPI_Remappable_Write(1)