Usage: mPAvr.exe [-<opts> [-<opts>]] [<infile> [-<opts>]] [-<opts>]]
<infile> can be of *.mpas and *.mcl type.

The following options are valid:

• -P <devicename> : MCU for which compilation will be done.
• -FO <oscillator> : Set oscillator [in MHz].
• -SP <directory> : Add directory to the search path list.
• -N <filename> : Output files generated to file path specified by filename.
• -B <directory> : Save compiled binary files (*.mcl) to 'directory'.
• -O : Miscellaneous output options.
• -DBG : Generate debug info.
• -MSF : Short message format.
• -Y : Dynamic link for string literals.
• -RA : Rebuild all sources in project.
• -L : Check and rebuild new libraries.
• -DL : Build all files as libraries.
• -LHF : Generate Long hex format.
• -PF : Pass project file name to command line.
• -EH <filename> : Full EEPROM HEX file name with path.
• -GC : Generate COFF file.
• -SSA : Enable SSA optimization.
• -BOOTOP <op> : Program memory configuration. Valid op values :
  • 0 - Application (excluding Boot Flash Section)
  • 1 - Application (including Boot Flash Section)
  • 2 - Bootloader (only Boot Flash Section)
• -BOOTSZ <size> : Bootloader Flash Section size in program words.

Example:

      	
mPAvr.exe -MSF -DBG -pATMEGA16 -C -O11111114 -fo8 -N"C:\Lcd\Lcd.mppav" -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for AVR\Defs\" 
              -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for AVR\Uses\LTE64KW\" -SP"C:\Lcd\" "Lcd.mpas" "__Lib_Math.mcl" "__Lib_MathDouble.mcl" 
              "__Lib_System.mcl" "__Lib_Delays.mcl" "__Lib_LcdConsts.mcl" "__Lib_Lcd.mcl"
        

Parameters used in the example:

• -MSF : Short Message Format; used for internal purposes by IDE.
• -DBG : Generate debug info.
• -pATMEGA16 : MCU ATMEGA16 selected.
• -C : Turn on case sensitivity.
• -O11111114 : Miscellaneous output options :
  • 1. Generate ASM file, valid values 0 or 1.
  • 2. Include HEX opcodes, valid values 0 or 1.
  • 3. Include ROM constants, valid values 0 or 1.
  • 4. Include ROM addresses, valid values 0 or 1.
  • 5. Generate LST file, valid values 0 or 1.
  • 6. Include Debug Info, valid values 0 or 1.
  • 7. Include Source Lines in Output Files, valid values 0 or 1.
  • 8. The optimization level, valid values from 0 to 5.
• -fo8 : Set oscillator frequency [in MHz].
• -N"C:\Lcd\Lcd.mppav" -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for AVR\defs\" : Output files generated to file path specified by filename.
• -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for AVR\Defs\" : Add directory to the search path list.
• -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for AVR\Uses\LTE64KW\" : Add directory to the search path list.
• -SP"C:\Lcd\" : Add directory to the search path list.
• "Lcd.mpas" "__Lib_Math.mcl" "__Lib_MathDouble.mcl" "__Lib_System.mcl" "__Lib_Delays.mcl" "__Lib_LcdConsts.mcl" "__Lib_Lcd.mcl" : Specify input files.

Want more examples and libraries? 
Find them on