mikroPascal PRO for 8051 Command Line Options   mikroPascal PRO for 8051 Command Line Options >

mikroPascal PRO for 8051 Command Line Options

Usage: mP8051 [-'opts' [-'opts']] ['infile' [-'opts']] [-'opts']]
Infile can be of *.mpas and *.mcl type.

The following options are valid :

- P : MCU for which compilation will be done.
- FO : Set oscillator.
- SP : Add directory to the search path list.
- N : Output files generated to file path specified by filename.
- B : Save compiled binary files (*.mcl) to 'directory'.
- O : Miscellaneous output options.
- DBG : Generate debug info.
- E : Set memory model opts ( S | C | L (small, compact, large)).
- L : Check and rebuild new libraries.
- C : Turn on case sensitivity.
- PLL : PLL factor.

Example:

      	
mP8051.exe -MSF -DBG -pAT89S8253 -ES -O11111114 -fo10 -N"C:\Lcd\Lcd.mpp51" -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for 8051\defs\" 
      	      -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for 8051\uses\"
      	      -SP"C:\Lcd\" "Lcd.mpas" "System.mcl" "Math.mcl" "Math_Double.mcl" "Delays.mcl" "__Lib_Lcd.mcl" "__Lib_LcdConsts.mcl"
        

Parameters used in the example:

• -MSF : Short Message Format; used for internal purposes by IDE.
• -DBG : Generate debug info.
• -pAT89S8253 : MCU AT89S8253 selected.
• -ES : Set small memory model.
• -O11111114 : Miscellaneous output options.
• -fo10 : Set oscillator frequency [in MHz].
• -N"C:\Lcd\Lcd.mpp51" -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for 8051\defs\" : Output files generated to file path specified by filename.
• -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for 8051\defs\" : Add directory to the search path list.
• -SP"C:\Program Files\Mikroelektronika\mikroPascal PRO for 8051\uses\" : Add directory to the search path list.
• -SP"C:\Lcd\" : Add directory to the search path list.
• "Lcd.mpas" "System.mcl" "Math.mcl" "Math_Double.mcl" "Delays.mcl" "__Lib_Lcd.mcl" "__Lib_LcdConsts.mcl" : Specify input files.