mikroC PRO for PIC Command Line Options   mikroC PRO for PIC Command Line Options >

mikroC PRO for PIC Command Line Options

Usage: mikroCPIC1618.exe [-<opts> [-<opts>]] [<infile> [-<opts>]] [-<opts>]]
Infile can be of *.c, *.mcl and *.pld type.

The following parameters and some more (see manual) are valid:

• -P <devicename> : MCU for which compilation will be done.
• -FO <oscillator> : Set oscillator [in MHz].
• -SP <directory> : Add directory to the search path list.
• -IP <directory> : Add directory to the #include search path list.
• -N <filename> : Output files generated to file path specified by filename.
• -B <directory> : Save compiled binary files (*.mcl) to 'directory'.
• -O : Miscellaneous output options.
• -DBG : Generate debug info.
• -L : Check and rebuild new libraries.
• -DL : Build all files as libraries.
• -Y : Dynamic link for string literals.
• -UICD: ICD build type.
• -EH <filename> : Full EEPROM HEX file name with path.
• -LHF : Generate Long hex format.
• -GC : Generate COFF file.

Example:

      	
mikroCPIC1618.exe -MSF -DBG -p16F887 -ES -C -O11111114 -fo8 -N"C:\Lcd\Lcd.mcppi" -SP"C:\Program Files\Mikroelektronika\mikroC PRO for PIC\Defs\" 
              -SP"C:\Program Files\Mikroelektronika\mikroC PRO for PIC\Uses\P16\" -SP"C:\Lcd\" "Lcd.c" "__Lib_Math.mcl" "__Lib_MathDouble.mcl" 
              "__Lib_System.mcl" "__Lib_Delays.mcl" "__Lib_LcdConsts.mcl" "__Lib_Lcd.mcl"
        

Parameters used in the example:

• -MSF : Short Message Format; used for internal purposes by IDE.
• -DBG : Generate debug info.
• -p16F887 : MCU 16F887 selected.
• -C : Turn on case sensitivity.
• -DL : All files built as libraries.
• -O11111114 : Miscellaneous output options :
  • 1. Generate ASM file, valid values 0 or 1.
  • 2. Include HEX opcodes, valid values 0 or 1.
  • 3. Include ROM constants, valid values 0 or 1.
  • 4. Include ROM addresses, valid values 0 or 1.
  • 5. Generate LST file, valid values 0 or 1.
  • 6. Include Debug Info, valid values 0 or 1.
  • 7. Include Source Lines in Output Files, valid values 0 or 1.
  • 8. The optimization level, valid values from 0 to 5.
• -fo8 : Set oscillator frequency [in MHz].
• -N"C:\Lcd\Lcd.mcppi" -SP"C:\Program Files\Mikroelektronika\mikroC PRO for PIC\Defs\" : Output files generated to file path specified by filename.
• -SP"C:\Program Files\Mikroelektronika\mikroC PRO for PIC\Defs\" : Add directory to the search path list.
• -SP"C:\Program Files\Mikroelektronika\mikroC PRO for PIC\Uses\P16\" : Add directory to the search path list.
• -SP"C:\Lcd\" : Add directory to the search path list.
• "Lcd.c" "__Lib_Math.mcl" "__Lib_MathDouble.mcl" "__Lib_System.mcl" "__Lib_Delays.mcl" "__Lib_LcdConsts.mcl" "__Lib_Lcd.mcl" : Specify input files.