mikroC PRO for ARM Command Line Options   mikroC PRO for ARM Command Line Options >

mikroC PRO for ARM Command Line Options

Usage: mikroCARM.exe [-<opts> [-<opts>]] [<infile> [-<opts>]] [-<opts>]]
Infile can be of *.c, *.emcl and *.pld type.

The following parameters are valid :

• -P <devicename> : MCU for which compilation will be done.
• -FO <oscillator> : Set oscillator in MHz.
• -SP <directory> : Add <directoryglt; to the search path list.
• -N <filename> : Full project file name with path.
• -B <directory> : Save compiled binary files (*.emcl) to 'directory'.
• -O : Miscellaneous output options.
• -DBG : Generate debug info needed for simulator and Hardware Debugger.
• -MSF : Short message format.
• -Y : Dynamic link for string literals.
• -RA : Rebuild all sources in project.
• -L : Check and rebuild libraries if needed.
• -DL : Build all files as libraries in order to distribute MCLs without sources.
• -LHF : Long hex format.
• -PF : Project file name.
• -EH <filename> : Full EEPROM HEX file name with path.
• -HEAP <size> : Heap size in bytes.
• -PF : Project file name.
• -SSA : Enable SSA optimization.
• -UICD : Build for Hardware Debugger.
• -BIN : Generate binary file.

Example:

    
mikroCARM.exe -MSF -DBG -pLM3S9B95  -Y -DL -O11111114 -fo80 -N"C:\Lcd\Lcd.mcarm" -SP"C:\Program Files\Mikroelektronika\mikroC PRO for ARM\Defs" 
          -SP"C:\Program Files\Mikroelektronika\mikroC PRO for ARM\Uses" -SP"C:\Lcd\" "Lcd.c" "__Lib_Math.emcl" "__Lib_MathDouble.emcl" 
          "__Lib_System.emcl" "__Lib_Delays.emcl" "__Lib_LcdConsts.emcl" "__Lib_Lcd.emcl"
    

Parameters used in the example:

• -MSF : Short Message Format; used for internal purposes by IDE.
• -DBG : Generate debug info.
• -pLM3S9B95 : MCU selected.
• -Y : Dynamic link for string literals enabled.
• -DL : All files built as libraries.
• -O11111114 : Miscellaneous output options :
  • 1. Generate ASM file, valid values 0 or 1.
  • 2. Include HEX opcodes, valid values 0 or 1.
  • 3. Include ROM constants, valid values 0 or 1.
  • 4. Include ROM addresses, valid values 0 or 1.
  • 5. Generate LST file, valid values 0 or 1.
  • 6. Include Debug Info, valid values 0 or 1.
  • 7. Include Source Lines in Output Files, valid values 0 or 1.
  • 8. The optimization level, valid values from 0 to 5.
• -fo80 : Set oscillator frequency [in MHz].
• -N"C:\Lcd\Lcd.mcarm" -SP"C:\Program Files\Mikroelektronika\mikroC PRO for ARM\Defs\" : Output files generated to file path specified by filename.
• -SP"C:\Program Files\Mikroelektronika\mikroC PRO for ARM\Defs\" : Add directory to the search path list.
• -SP"C:\Program Files\Mikroelektronika\mikroC PRO for ARM\Uses\" : Add directory to the search path list.
• -SP"C:\Lcd\" : Add directory to the search path list.
• "Lcd.c" "__Lib_Math.emcl" "__Lib_MathDouble.emcl" "__Lib_System.emcl" "__Lib_Delays.emcl" "__Lib_LcdConsts.emcl" "__Lib_Lcd.emcl" : Specify input files.