Usage: mBPIC32.exe [-<opts> [-<opts>]] [<infile> [-<opts>]] [-<opts>]]
Infile can be of *.mbas, *.emcl and *.pld type.

The following parameters and some more (see manual) are valid:

• -P <devicename> : MCU for which compilation will be done.
• -FO <oscillator> : Set oscillator [in MHz].
• -SP <directory> : Add directory to the search path list.
• -N <filename> : Output files generated to file path specified by filename.
• -B <directory> : Save compiled binary files (*.emcl) to 'directory'.
• -O : Miscellaneous output options.
• -DBG : Generate debug info.
• -MSF : Short message format.
• -Y : Dynamic link for string literals.
• -RA : Rebuild all sources in project.
• -L : Check and rebuild new libraries.
• -DL : Build all files as libraries.
• -LHF : Generate Long hex format.
• -PF : Project file name.
• -EH <filename> : Full EEPROM HEX file name with path.
• -HEAP <size> : Heap size in bytes.
• -GC : Generate COFF file.
• -PF : Project file name.
• -SSA : Enable SSA optimization.
• -UICD : ICD build type.
• -INTDEF : Interrupt settings.
• -EBASE : Exception base address.

      	
mBPIC32.exe -MSF -DBG -p32MX460F512L -Y -DL -O11111114 -fo80 -N"C:\Lcd\Lcd.mbp32" -SP"C:\Program Files\Mikroelektronika\mikroBasic PRO for PIC32\Defs" 
              -SP"C:\Program Files\Mikroelektronika\mikroBasic PRO for PIC32\Uses" -SP"C:\Lcd\" "__Lib_Math.emcl" "__Lib_MathDouble.emcl" 
              "__Lib_System.emcl" "__Lib_Delays.emcl" "__Lib_LcdConsts.emcl" "__Lib_Lcd.emcl" "Lcd.mbas"
      

Parameters used in the example:

• -MSF : Short Message Format; used for internal purposes by IDE.
• -DBG : Generate debug info.
• -p32MX460F512L : MCU P32MX460F512L selected.
• -Y : Dynamic link for string literals enabled.
• -DL : All files built as libraries.
• -O11111114 : Miscellaneous output options :
  • 1. Generate ASM file, valid values 0 or 1.
  • 2. Include HEX opcodes, valid values 0 or 1.
  • 3. Include ROM constants, valid values 0 or 1.
  • 4. Include ROM addresses, valid values 0 or 1.
  • 5. Generate LST file, valid values 0 or 1.
  • 6. Include Debug Info, valid values 0 or 1.
  • 7. Include Source Lines in Output Files, valid values 0 or 1.
  • 8. The optimization level, valid values from 0 to 5.
• -fo80 : Set oscillator frequency [in MHz].
• -N"C:\Lcd\Lcd.mbp32" -SP"C:\Program Files\Mikroelektronika\mikroBasic PRO for PIC32\Defs" : Output files generated to file path specified by filename.
• -SP"C:\Program Files\Mikroelektronika\mikroBasic PRO for PIC32\Defs" : Add directory to the search path list.
• -SP"C:\Program Files\Mikroelektronika\mikroBasic PRO for PIC32\Uses" : Add directory to the search path list.
• -SP"C:\Lcd\" : Add directory to the search path list.
• "Lcd.mbas" "__Lib_Math.emcl" "__Lib_MathDouble.emcl" "__Lib_System.emcl" "__Lib_Delays.mcl" "__Lib_LcdConsts.emcl" "__Lib_Lcd.emcl" : Specify input files.

Want more examples and libraries? 
Find them on