SPI Lcd Library

The mikroBasic PRO for FT90x provides a library for communication with Lcd (with HD44780 compliant controllers) in 4-bit mode via SPI interface.

For creating a custom set of Lcd characters use Lcd Custom Character Tool.

Important :

When using this library with FT90x family MCUs be aware of their voltage incompatibility with certain number of Lcd modules.
So, additional external power supply for these modules may be required.
Library uses the SPI module for communication. The user must initialize the appropriate SPI module before using the SPI Lcd Library.
For MCUs with multiple SPI modules it is possible to initialize all of them and then switch by using the SPIM_Set_Active() routine. See the SPI Library functions.
This Library is designed to work with the mikroElektronika's Serial Lcd Adapter Board pinout, see schematic at the bottom of this page for details.

The implementation of SPI Lcd Library routines is based on Port Expander Library routines.

Prototype	sub procedure SPI_Lcd_Config(dim DeviceAddress as byte)
Description	Initializes the Lcd module via SPI interface.
Parameters	`DeviceAddress:` SPI expander hardware address, see schematic at the bottom of this page
Returns	Nothing.
Requires	External dependencies are the same as Port Expander Library external dependencies. The SPI module needs to be initialized. See SPIx_Init and SPIx_Init_Advanced routines.
Example	' Port Expander module connections dim SPExpanderRST as sbit at GPIO_PIN8_Bit dim SPExpanderCS as sbit at GPIO_PIN9_Bit ' End Port Expander module connections ... ' Initialize SPI module used with PortExpander SPIM1_Init() SPI_Lcd_Config(0) ' Initialize Lcd via SPI
Notes	None.

Prototype	sub procedure SPI_Lcd_Out(dim row, column as byte, dim byref text as string)
Description	Prints text on the Lcd starting from specified position. Both string variables and literals can be passed as a text.
Parameters	`row:` starting position row number `column:` starting position column number `text:` text to be written
Returns	Nothing.
Requires	Lcd needs to be initialized for SPI communication, see SPI_Lcd_Config routine.
Example	' Write text "Hello!" on Lcd starting from row 1, column 3: SPI_Lcd_Out(1, 3, "Hello!")
Notes	None.

Prototype	sub procedure SPI_Lcd_Out_CP(dim byref text as string)
Description	Prints text on the Lcd at current cursor position. Both string variables and literals can be passed as a text.
Parameters	`text:` text to be written
Returns	Nothing.
Requires	Lcd needs to be initialized for SPI communication, see SPI_Lcd_Config routine.
Example	' Write text "Here!" at current cursor position: SPI_Lcd_Out_CP("Here!")
Notes	None.

Prototype	sub procedure SPI_Lcd_Chr(dim Row, Column, Out_Char as byte)
Description	Prints character on Lcd at specified position. Both variables and literals can be passed as character.
Parameters	`Row:` writing position row number `Column:` writing position column number `Out_Char:` character to be written
Returns	Nothing.
Requires	Lcd needs to be initialized for SPI communication, see SPI_Lcd_Config routine.
Example	' Write character "i" at row 2, column 3: SPI_Lcd_Chr(2, 3, "i")
Notes	None.

Prototype	sub procedure SPI_Lcd_Chr_CP(dim Out_Char as byte)
Description	Prints character on Lcd at current cursor position. Both variables and literals can be passed as character.
Parameters	`Out_Char:` character to be written
Returns	Nothing.
Requires	Lcd needs to be initialized for SPI communication, see SPI_Lcd_Config routine.
Example	' Write character "e" at current cursor position: SPI_Lcd_Chr_Cp("e")
Notes	None.

Prototype	sub procedure SPI_Lcd_Cmd(dim out_char as byte)
Description	Sends command to Lcd.
Parameters	`out_char:` command to be sent
Returns	Nothing.
Requires	Lcd needs to be initialized for SPI communication, see SPI_Lcd_Config routine.
Example	' Clear Lcd display: SPI_Lcd_Cmd(_LCD_CLEAR)
Notes	Predefined constants can be passed to the routine, see Available SPI Lcd Commands.

SPI Lcd Command	Purpose
_LCD_FIRST_ROW	Move cursor to the 1st row
_LCD_SECOND_ROW	Move cursor to the 2nd row
_LCD_THIRD_ROW	Move cursor to the 3rd row
_LCD_FOURTH_ROW	Move cursor to the 4th row
_LCD_CLEAR	Clear display
_LCD_RETURN_HOME	Return cursor to home position, returns a shifted display to its original position. Display data RAM is unaffected.
_LCD_CURSOR_OFF	Turn off cursor
_LCD_UNDERLINE_ON	Underline cursor on
_LCD_BLINK_CURSOR_ON	Blink cursor on
_LCD_MOVE_CURSOR_LEFT	Move cursor left without changing display data RAM
_LCD_MOVE_CURSOR_RIGHT	Move cursor right without changing display data RAM
_LCD_TURN_ON	Turn Lcd display on
_LCD_TURN_OFF	Turn Lcd display off
_LCD_SHIFT_LEFT	Shift display left without changing display data RAM
_LCD_SHIFT_RIGHT	Shift display right without changing display data RAM

Want more examples and libraries?
Find them on