Using Microchip MPLAB® IDE with mikroElektronika compilers
This new feature will boost your productivity by enabling you to import your code in a non-mikroElektronika enironment - Microchip's MPLAB®.
With the introduction of COFF File in mikroElektronika compiler, it is possible to debug and analyze your code through a software or hardware simulator.
Debugging Your Code
If your program has been built correctly, the compiler should generate a .hex file and a .cof file. The cof file contains all the information necessary for high-level debugging in MPLAB®, and it should be loaded by selecting the File › Import... menu in the MPLAB®.
Once you have done this, you have two choices: either to use MPLAB® ICD 2 Debugger, if you have the appropriate hardware, or MPLAB® Simulator.
Trademarks:
The Microchip name and logo, the Microchip logo, Accuron, dsPIC, KEELOQ, KEELOQ logo, microID, MPLAB, PIC, PICmicro, PICSTART, PRO MATE, rfPIC and SmartShunt are
registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
What do you think about this topic ? Send us feedback!
Find them on
